So Fix it

How to Mount Shovelhead Exhaust Pipes

In the 100 years of the motorcycles existence, it has seen many changes. The Shovelhead motor, named for the shape of the top of the motor, has received a lot of use in those years. Changing out the exhaust system can increase performance and change the tune of exhaust note, giving you a different riding experience. Installing an exhaust on a Shovelhead motor isnt difficult, and can be done within an hour or so with the right tools.

Instructions

1

Install the allen key socket onto the 3/8-inch ratchet and extension, then unbolt the stock exhaust system from the engine. You may need to use a 3/8-inch universal joint to get around the tubing in some sections.

2

Unbolt the exhaust from the frame of the bike at the end of the tailpipes using the 3/8-inch ratchet and socket. Place the exhaust system to the side of the vehicle.

3

Mount the new exhaust system onto the motorcycle and bolt the new exhaust to the motor using the allen key socket on the 3/8-inch ratchet and extension. You may need to use a 3/8-inch universal joint to get around the tubing in some sections.

4

Bolt the pipes of the exhaust system to the frame of the bike using the factory hardware and the 3/8-inch ratchet and socket. Start the bike and listen for any exhaust leaks. If you hear some, tighten down the exhaust system on the engine again.

Posted by Unknown at 2:00 AM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: exhaust, how, mount, pipes, shovelhead, to