So Fix it

How to Use a Carburetor Cleaner

Carburetor cleaner is designed to remove heavy varnish and gunk from the inside and outside of a vehicles carburetor. If the carburetor is not cleaned periodically, it will begin to affect the vehicles mileage and performance. The carb should be cleaned a couple of times a year to prevent buildup and keep the engine running smooth.

Instructions

1

Remove the air cleaner unit from the engine by unscrewing the wing nut. You might need pliers to turn the wing nut if it is very tight.

2

Vacuum off the top of the engine area to prevent dirt and debris from being sucked into the engine while the air cleaner is not in place.

3

Spray the entire carburetor inside and out with carburetor cleaner to loosen the gunk and varnish. Use shop rags to wipe up any heavy grease and gunk loosened by the carb cleaner.

4

Start the vehicle. With the vehicle running, spray carburetor cleaner down the throat of the carburetor and around the outside. The engine will pick up a bit as the vehicle burns the carburetor cleaner. Wait a few minutes and shut off the engine.

5

Spray the outside and inside of the carburetor again heavily. Start the vehicle again and spray more carb cleaner around the outside and inside while the engine is running.

6

Spray the entire air cleaner inside and out with carburetor cleaner. Wipe the air cleaner dry with shop towels. Install a new air filter element and re-install the air cleaner unit onto the carburetor.

Posted by Unknown at 6:15 AM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: a, carburetor, cleaner, how, to, use