So Fix it

How do I Change a Fog Light Bulb on a 2005 Chevy Monte Carlo

Although not as important as the headlights, a vehicles fog lights still make driving safer and easier when there is a lot of fog in the area. When there is a malfunction with the fog lights, they must be replaced as quickly as possible. Thankfully, replacing a fog light on the 2005 Chevrolet Monte Carlo is a simple process that does not take much time.

Instructions

1

Turn off the Monte Carlo and put on the gloves. Whenever working in or under a vehicle, gloves should be worn for safety reasons.

2

Place the jack under the vehicle and raise it to a comfortable level. Whereas the headlight assembly is accessed through the hood of the car, the fog lights can only be reached from underneath.

3

Unplug the electrical wire connection that is connected to the fog lights. The connection is located under the vehicle, plugged into the fog lights. This will allow you access to the fog light assembly.

4

Remove the bulb socket by twisting and pulling it from out of the fog light assembly. Remove the old bulb by pulling it out of the assembly.

5

Insert the replacement bulb into the assembly and lock it into place. Reattach the socket by twisting it back onto the fog light assembly. Reconnect the electrical wire connection to the fog light assembly and lower the Monte Carlo back onto the ground.

Posted by Unknown at 10:15 PM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: 2005, a, bulb, carlo, change, chevy, do, fog, how, i, light, monte, on