So Fix it

Although not as important as the headlights, a vehicles fog lights still make driving safer and easier when there is a lot of fog in the area. When there is a malfunction with the fog lights, they must be replaced as quickly as possible. Thankfully, replacing a fog light on the 2005 Chevrolet Monte Carlo is a simple process that does not take much time.

Instructions

1

Turn off the Monte Carlo and put on the gloves. Whenever working in or under a vehicle, gloves should be worn for safety reasons.

2

Place the jack under the vehicle and raise it to a comfortable level. Whereas the headlight assembly is accessed through the hood of the car, the fog lights can only be reached from underneath.

3

Unplug the electrical wire connection that is connected to the fog lights. The connection is located under the vehicle, plugged into the fog lights. This will allow you access to the fog light assembly.

4

Remove the bulb socket by twisting and pulling it from out of the fog light assembly. Remove the old bulb by pulling it out of the assembly.

5

Insert the replacement bulb into the assembly and lock it into place. Reattach the socket by twisting it back onto the fog light assembly. Reconnect the electrical wire connection to the fog light assembly and lower the Monte Carlo back onto the ground.

You can reset the computer on your 01 Chevy Monte Carlo right from your home garage, saving yourself time and money. The On-Board Diagnostics computer receives trouble codes from sensors positioned throughout the vehicle. These sensors keep track of all the functions of the vehicle and communicate with the computer. When the computer receives a trouble code, it communicates this to the driver in the form of a warning light on the dashboard. You can turn off these lights and reset after you have made repairs.

Instructions

1

Put the key into the ignition and turn it to the "on" position, but do not start the engine.

2

Plug the computerized scan tool into the diagnostic port under the dash. You can buy a computerized scan tool from your local auto parts retailer. Select "PCM" on the menu and then choose "codes." Finally, select "clear all codes."

3

Unplug the computerized scan tool from the port.

4

Turn on the engine and observe the instrument panel to make sure all warning lights have shut off. The computer is now reset.

The power steering components on your Chevrolet Monte Carlos 350-cubic-inch V8 engine actually have very little to do with the engine itself. The power steering system uses power generated by the running engine to provide you with easy handling and steering. Without power steering, your car would be extremely difficult to steer or control.

Power Steering Pump

The power steering pump is a pump that supplies the hydraulic power for the power steering system. Without the power steering pump, the Monte Carlos power steering system will not work. The power steering pump takes the power generated by the pulleys and belts from the engine and converts it to compensate for the steering and assist you in turning and handling the vehicle. There is a reservoir on the power steering pump that holds the hydraulic power steering fluid.

Hoses

The power steering hoses allow the power steering fluid to travel. The hoses connect the power steering pump into the steering mechanisms themselves, normally the gearbox or power steering box, depending on the model of Monte Carlo you own. The power steering systems have been updated and improved since Chevrolet originally introduced the Monte Carlo in the 1970s.

Belt and Pulleys

The power to run the Monte Carlos power steering pump is generated by a belt and pulley system that turns power generated by the engine into the force that generates the hydraulic power for the steering system.