Sunday, March 23, 2014
Instructions for Installation of Euro Clear Fog Lights
Most newer vehicles, be they cars, trucks or SUVs, come standard with fog lights. These additional headlights are set low in the nose of the vehicle to better illuminate the road directly in front of the vehicle. Fog lights are valuable aides to the improving a drivers vision in foggy, snowy or rainy conditions. Adding euro clear fog lights is a quick and easy repair that personalizes your vehicle and gives it an updated look.
Instructions
- 1
Park your vehicle in a safe work place. Look for a flat and level surface that has adequate light to work by. Turn off the engine and apply the parking brake.
2Wait 30 minutes before beginning work to allow the vehicle to cool. Slide underneath the front end of the vehicle and position yourself near the rear of the drivers side fog light.
3Remove any dust covers or access panels. These can usually be removed by prying them off with a Flathead screwdriver. Once these are removed, locate the wiring harness. The harness will be plugged into the fog light socket. Unplug the harness to access the interior of the fog light assembly.
4Unscrew the mounting bolts. The bolts hold the assembly in the front bumper of the automobile. On most autos, there will be three bolts which can be removed with a regular wrench. Once the bolts are removed, slide out the old fog light assembly.
5Insert the euro clear fog light assembly. Place the new assembly into the same place in the bumper from where the old assembly was removed. Attach the mounting bolts, wiring harness and dust cover as they were on the original assembly.
6Repeat the process for the light on the passengers side.
No comments:
Post a Comment