Sunday, November 17, 2013
How to Retrieve 1996 Ford Explorer Error Codes
You can retrieve the error codes from your 1996 Ford Explorer right from your home garage, saving money and time. The 96 Explorer comes equipped with an On-Board Diagnostics II (OBD II) computer that monitors all of the vehicles functions. Sensors send error codes to the computer, which it stores for later retrieval. The computer alerts you to these error codes by illuminating a warning or service light on the vehicles dash. To read the codes you must buy or borrow an OBD II scan tool. These tools can be obtained from any auto parts retailer.
Instructions
- 1
Find the diagnostic port on the drivers side dash near the steering column. The port will be the same shape and size as the OBD II scan tool connector. Plug the OBD II scan tool into this port.
2Put the key into the ignition and turn the vehicle to the "ON" position, but dont start the engine. This will power on most scan tools. If not, look for the "ON" switch on the scan tool and turn it on.
3Press "Retrieve Codes" or a similar command on the scan tool. Wait while it interfaces with the Explorers computer. Eventually you will see one or more alphanumeric codes. Write down the codes on a piece of paper. Look up their meaning in the scan tools manual.
4Unplug the scan tool and have the vehicle serviced or repaired based on the information obtained from the error codes.
No comments:
Post a Comment