So Fix it

How to Jumpstart the Hyundai Veracruz

Car batteries drain when the car is off and electrical components are still being utilized. If your Hyundai Veracruzs car battery has been drained, it is possible that it may lack the charge to turn the engine on. Jump starting the car with the use of another functioning car is an ideal solution when a battery charger is not readily available.

Instructions

1

Position the cars close to each other so that they jumper cables can easily reach the terminals on both batteries. Make sure that the cars do not touch each other and the charged battery on the functioning car is a 12 volt battery.

2

Turn off all electrical devices and components to keep the electrical consumption to a minimum. Do not turn on the headlights under any circumstance as they consume too much electricity.

3

Clamp one end of the red, positive jumper cables to the discharged batterys positive "+" terminal, then clamp the other end to the positive "+" terminal on the charged battery.

4

Clamp one end of the black, negative cable to the charged batterys negative "-" terminal, then the other end to a solid, non-moving metallic point in the Veracruz. Be sure not to connect it to any fuel lines or any parts that move when the engine starts.

5

Turn the functioning car on and rev its engine to 2,000 RPM. Wait a few moments and start the Veracruzs engine. Remove the negative and positive jumper cables from both cars.

Posted by Unknown at 8:45 PM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: how, hyundai, jumpstart, the, to, veracruz