So Fix it

How Do I Remove the Drivers Side Door Panel on a 1994 Jeep Wrangler

Jeep introduced the Wrangler model in 1987 and continued the YJ version until 1995. The door panel on the 1994 Jeep Wrangler can be removed to access the interior components of the door. Speakers and door lock assemblies often need maintenance, and removing the door panel is the only way to access them. The panel in each model-year of Jeep Wrangler is identical and removed the same way.

Instructions

1

Remove the two Phillips head screws that hold the interior door handle in place. There is a screw at each end of the handle.

2

Remove the Phillips head screw on the door handle lock mechanism.

3

Pry off the plastic panel from the metal surround with a flat head screwdriver. Place the screwdriver between the plastic panel and the metal door and slide it in between until each plastic clip has been removed. Work around the door in a clockwise fashion until the panel is removed.

4

Disconnect the locking rods from the interior door handle. The locking rods connect to the handle and need to be pulled up through the bracket manually to be removed.

5

Remove the panel and place it on a flat surface. If the panel needs to be re-installed, do so in the reverse order of removal.

Posted by Unknown at 8:00 AM

Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Labels: 1994, a, do, door, drivers, how, i, jeep, on, panel, remove, side, the, wrangler