Tuesday, April 22, 2014
How to Reset the Service Engine Light on the 2003 Buick
Resetting the Service Engine Light (SEL) on a 2003 Buick should only be performed after the diagnostic trouble code or codes (DTCs) have been properly diagnosed and repaired if necessary. Some codes can be as simple as a small vacuum leak from a loose gas cap, but others can indicate more serious problems. Resetting the light without determining the source of the code(s) can create future problems with other components on the Buick and lead to more expensive repairs.
Instructions
- 1
Open the drivers side door on the 2003 Buick and locate the diagnostic link connector (DLC) underneath the dashboard. On a LeSabre and Park Avenue, the DLC is located under the dash to the left of the steering column. On the Century and Rendezvous models, the DLC is under the dash directly beneath the steering column. On the Buick Regal, the DLC is located under the dash to the right of the steering column.
2Plug the OBD II scanner/eraser into the DLC. Because of the DLCs shape and the shape of the plug, there is only one correct way to plug it in.
3Place the key of the Buick into the ignition and turn the key to the accessory power position. This position illuminates the lights on the instrument cluster and powers all the accessory components without the engine running. It will also provide power to the scanner from the Buicks battery.
4Press the erase button on the faceplate of the scanner. If the scanner is not equipped with an erase button, follow the onscreen menu and use the scroll or enter button(s) to the erase codes or DTCs option and press the enter button.
5Allow the onscreen menu of the scanner to default back to its main menu or display a "command sent" message.
6Start the engine to the Buick and check the instrument cluster to ensure the SEL is no longer displayed. If it still is on or comes back quickly, the code(s) should be diagnosed properly and repairs made if necessary.
No comments:
Post a Comment